Archives: Assembles

Soft Closing Drawer

Step 1

Fasten the Drawer Side Panel and Drawer Back Panel.

Step 2

Insert Bottom and another Drawer Side Panel into the grooves.

Step 3

Position the Front into the grooves, then screw the Side Panel and the Front.

Step 4

Screw the Locking device on the bottom.

Step 5

Slide the Drawer Slide from the Faceframe until the drawer slide is aligned with the Faceframe, then fasten into pre-drilled holes.

Step 6

Locate the Drawer on the Slides, then push the Drawer into cabinets until the Locking Devices connecting with the Slides.

Diagonal Wall Corner

Step 1

Connet the End Panel and Back End Panel, then screw them together on the Back End Panel.

Step 2

Insert the Bottom Panel and the Top Panel into the grooves.

Step 3

Position the another Back End Panel into the grooves, then screw them together.

Step 4

Locate the another End Panel and screw it.

Step 5

Screw the dowels into the Faceframe.

Step 6

Position the Faceframe, then use screwdriver to lock the Casings.

Base Cabinet

Step 1

Connect the Side Panel and Backboard, then fasteners into the hole on the backboard.

Step 2

Insert the Bottom Panel and the Top Panel into the grooves.

Step 3

Position the another Side Panel into the grooves, then fasteners into the hole on the backboard.

Step 4

Screw the dowels into the Faceframe.

Step 5

Position the Faceframe, then use screwdriver to lock the Castings.

Step 6

Slide the Drawer Slide from the Faceframe until the drawer slide is aligned with the Faceframe, then fasten into pre-drilled holes.

Step 7

Fasten the Drawer Side Panel and Drawer Back Panel.

Step 8

Insert bottom and another Drawer Side Panel into the grooves.

Step 9

Position the Front into the grooves, then screw the Side Panel and the Front.

Step 10

Slide the Drawer into the track.

Step 11

Fasten the hinges into the doors, then screw them on the cabinet.

Step 12

Screw the Corner Bracket.

Blind Corner Cabinets

Step 1

Connect the Side Panel and Backboard, then fasteners into the hole on the backboard.

Step 2

Insert the Bottom Panel and the Top Panel into the grooves.

Step 3

Position the another Side Panel into the grooves, then fasteners into the hole on the backboard.

Step 4

Screw the dowels into the Faceframe.

Step 5

Position Shelf and the Faceframe, then use Screwdriver to lock the Casings.

Step 6

Fasten the hinges into the doors, then screw them on the cabinet.